GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors
12.2010
11
The ON / OFF switch can be installed in either side of the fuselage: remove the
switch bezel, fit the switch through the opening in the fuselage from the inside, then
fit the bezel and the two retaining screws from the outside to secure it.
The canopy
Before trimming the canopy you will need to attach the wing to the fuselage: join the
panels using the steel joiner rod, then fix the wing to the fuselage using the rubber
bands supplied in the kit.
Cut out the canopy along the marked lines using a small pair of scissors (Lexan
shears, Order No. 26), and trim it carefully to fit.
The canopy can be fixed to the fuselage using either two pan-head self-tapping
screws or strips of tape.
The final step is to apply the decals in the arrangement shown in the kit box
illustration and on the title page of the assembly instructions.
