GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
No liability for printing errors. We reserve the right to introduce modifications.
02/2007
1
Order No.
9577
9577.MX
Instructions
ULTIMATE
For two-stroke motors up to 20 cc capacity
This model requires a four-channel radio control system
Specification
Wingspan approx.
1400 mm
Fuselage length excl. spinner approx.
1370 mm
Wing area approx.
66 dm²
Tailplane area approx.
12 dm²
Total surface area approx.
78 dm²
All-up weight according to fittings approx. 4100 g
Longitudinal dihedral
0 - 0.5°, top wing
0°, bottom wing
Centre of Gravity approx.
100 - 120 mm aft of the root leading edge
(top wing)
Caution:
This model is not a toy!
If you are a beginner to this type of powered model, please ask an experienced model
flyer for help and support. If you attempt to operate the model without knowing what you
are doing, you could easily injure yourself or somebody else. Please keep your safety
and well-being in mind at all times.
Important: before you start construction
Even if you have already built a large number of RC models please read right through
these instructions and check that all the kit components are actually present. We have
taken great trouble to keep construction as simple as possible, without making any
compromises in the area of safety.
Note regarding the film covering
Minor creases or bubbles may develop in the film covering due to major fluctuations in
weather conditions (temperature, humidity etc.); in rare cases you may even find a slight
warp in a component. These minor faults are in the nature of film-covered built-up
wooden structures, and can easily be corrected using a heat gun, as commonly used for
modelling.
Creases:
Blow warm air over the area and rub down with a soft cloth.
