background image

2

GR-18_Copter_jh_V1

Index .................................................................................. 2
Introduction ........................................................................ 3
Service centre ..................................................................... 3
Package content ................................................................ 3
Intended use ...................................................................... 4
Technical Data .................................................................... 4
Installation in the model (Copter) ......................................... 6
Binding ............................................................................... 6
Connections ....................................................................... 7
Receiver setting menu ........................................................ 7
Gyro initialization  ................................................................ 8
Transmitter pre-setting ........................................................ 9
Main settings ...................................................................... 9
Axis assignment ............................................................... 10
Roll and Nick setting ......................................................... 11
Multicopter Yaw settings ................................................... 12
Firmware Update .............................................................. 13
Declaration of conformity .................................................. 15
Notes for environmental protection ................................... 16
Warranty ........................................................................... 16

Index

Summary of Contents for 33579

















Reviews: