GRAUPNER 33579 User Manual Download Page 15

Page: 15 / 16

INNOVATION & TECHNOLOGIE

GR-18_Copter_jh_V1

Konformitätserklärung gemäß dem Gesetz über Funkanlagen und

Telekomunikationsendeinrichtungen (FTEG) und der Richtlinie 1999/5/EG (R&TTE)

Declaration of Conformity in accordiance with the Radio and Telecomunikations Terminal Equipment

Act (FTEG) and Directive 1999/5/EG (R&TTE)

Graupner/SJ GmbH
Henriettenstraße 96
D-73230 Kirchheim/Teck

erklärt, dass das Produkt:

declares that the product

Geräteklasse:

Equipment class

den grundlegenden Anforderungen des § 3 und den übrigen

einschlägigen Bestimmungen des

FTEG (Artikel 3 der R&TTE) entspricht.

complies with the essential requirements of § 3 and the other relevant provisions of the FTEG (Article 3 of the
R&TTE Directive).

Angewendete harmonisierte Normen:

Harmonised standards applied

EN 60950-1:A11+A1+A12

+A2:2013
62311:2008

EN 301 489-1 V1.9.2
EN 301 489-17 V2.2.1

EN 300 328 V1.8.1

Health and safety requirements pursuant to § 3 (1) 1. (Article 3 (1) a))

Protection requirement concernig electromagnetic compatibility
§ 3 (1) 2, Artikel 3 (1) b))

Measures for the efficient use of the radio frequency spectrum
§ 3 (2) (Article 3 (2))

Kirchheim, 07. Mai 2015

Ralf Helbing, Geschäftsführer

Ralf Helbing, Managing Director

Graupner/

SJ GmbH

Henriettenstraße 96

D-73230 Kirchheim/Teck Germany

Tel: 07021/722-0

EMail: [email protected]

Fax: 07021/722-188

Gesundheit

und Sicherheit gemäß § 3 (1) 1. (Artikel 3 (1)a))

Schutzanforderungen in Bezug auf elektromagnetische
Verträglichkeit § 3 (1) 2, Artikel 3 (1) b))

Maßnahmen zur effizienten Nutzung des Frequenzspektrums

§ 3 (2) (Artikel 3 (2))

GR-24 PRO +3xG + 3A + 3M+Vario HoTT - No. 33583

GR-18 +3xG + 3A+Vario HoTT - No. 33579

Declaration of conformity

#33579: GR-18+3xG+3A+Vario
FCC ID: SNL-16006100
#33583 : GR-24 PRO +3XG+3A+3M+VARIO
FCC ID: SNL-16005800

Summary of Contents for 33579

















Search results

Summary of Contents for 33579

Reviews:

Related manuals for 33579

Brands by name

Popular brands

GRAUPNER 33579, User Manual

Search results

Summary of Contents for 33579

Reviews:

Related manuals for 33579

Brands by name

Popular brands