How to Assemble Your Guillotine Tower - pg. 3
IMPORTANT NOTE: Two people are required to install your Guillotine.
Gratz Industries is not responsible for any damages to the Guillotine that is caused by improper opening, set up or installation. Please email [email protected] for any inquiries.
STEP 5 - Connecting Mat and Springs
Use your drill to fasten screws through all pre-drilled holes on the foot plate. Once firmly secure, bring the guillotine mat over
and align mat with holes on the foot plate, use your drill to screw into the pre-drilled holes on the foot plate. Prep for
use: prior to using make sure all springs are in place to your liking and are properly attached.
STEP 5 - Screw into the Guillotine FRAME
Arrange your mounting bracket. One side faces the ceiling and the other side is flat next to the
Guillotine Frame. Then screw in the Self Tapping Metal Screws into the inside of the Guillotine Frame.
STEP 4 - Screw into BEAM OF CEILING
Arrange your mounting bracket. One side faces
the ceiling and the other side is flat next to the
Guillotine Frame. Then screw in the Wood Screws
into the ceiling.
STEP 6 - Clip on Accessories
Attach and clip the rest of the
accessoreis to your preference.
Enjoy your Guillotine Tower!
