1
Dial with tappets
2
Channel 1 LED: lights up if channel is active (CH)
3
Mounting plate
4
Channel 1 manual switch (CH)
5
Channel 2 manual switch (HW)
6
Cover
7
Channel 2 LED: lights up if channel is active (HW)
The “thermio™ eco B2” timer is an analogue two-channel synchronous timer that switches connected
loads on and off at defined times.
The “thermio™ eco B2” timer is used to regulate two heating circuits. Hot water or heating circuits can
be connected and regulated independently of each other in the OFF and CONST. operating mode. In
TIME operating mode, the two heating circuits are regulated together, according to the setting of the ON
or OFF tappets. Individual regulation of, for example, central heating and hot water is implemented using
two independent switching outputs.
Abbreviations
•
CH = Central Heating
•
HW = Hot Water
8
Summary of Contents for thermio eco b1
