GrassFlap.com
Phone: (502)594-3546
8
SE Pedal
SEL Pedal
Step 4
Step 5
Step 2
Position removable clevis onto cable ball.
Step 1
Pull rubber boot off of cable fitting and spin nut 1
off of cable fitting. Spin nut 2 onto fitting so one
thread is showing.
SE & SEL Pedal Cable Installation
1 thread
Nut 1
Nut 2
For video showing
how to install cable
on pedal scan using
phone camera.
Secure with
cable tie
A) Once pedal is installed on mower attach cable clamp
or zip tie to secure cable.
B) Verify everything is in place and secure.
A) Position removable clevis on pedal with clevis slot
on cut out side of pedal.
B) Insert 1/4 pin with head on same side as clevis slot.
C) Insert cotter pin and wrap around pin to secure.
C
A
B
A) Slip
cable wire
into slot.
B) Spin nut 1 onto fitting to secure cable to pedal.
DO NOT OVERTIGHTEN NUTS.
C) Push rubber boot back onto fitting.
Step 3
