T2
―
User Manual ― Workstation mode ―
90
Section 4 ―
APPENDIX
T2 Hardware specifications
PC interface
USB
USB
USB2.0 x2 (front), x6 (rear)
IEEE1394
IEEE1394a x1 (front), x1 (rear), Up to 12V , 1A of bus power (total for both ports)
PS/2
Mini DIN 6pin x2
Display
Analog RGB D-SUB 15pin x1
Serial
RS232C D-SUB 9pin x1 (Not used)
LAN
RJ-45 Network connector x2, 10BASE-T/100BASE-TX/1000BASE-T
Sound
Stereo mini jack x6 (Not used)
Removable media
DVD-ROM x1
2.5 inched removable drive bay x1 (RAID/SSD model)
Video signal
Input
SDI
1 line, BNC x2 (Active through x1)
DVI-I
1 line, DVI-I x1. The analog sections are also for YPbPr. (DVI-D does not support HDCP.)
Composite
1 line, BNC x1
Output
SDI
2 lines, BNC x2
DVI-I
2 lines. The analog sections are also for RGB/YPbPr.
Composite
2 lines, BNC x2
Monitor
Composite, 2 lines, BNC x2
Audio signal
Input
Balanced audio
1 line, XLR-3-31 x2, Up to 24dBu
Digital audio
1 line, AES/EBU BNC x1
Output
Balanced audio
2 lines, XLR-3-32 x4
Digital audio
1 line, AES/EBU, 2 lines, BNC x2
Headphones
Stereo jack x1
Monitor line
Stereo mini jack x1
Timecode
Input
LTC
1 line, BNC x1
Output
LTC
2 lines, BNC x2
REF in
HD tri-level, BB compatible, BNC x2 (throughout x1)
Remote
GPI I/O
D-SUB 15pin x1, 6 input, 6 output pins.
RS422
3 lines, D-SUB 9pin x3 (each one of the lines correspond to the R1, P1 or P2 channel)
Power supply
AC 100V - 240V, 50/60Hz
Power consumption
2.5A - 1.1A
Dimensions
430(W) x 132(H) x 550.8(D) (Projecting parts not included)
Weight
15kgf approximately
Operating temperature
+5 to +35 degrees C
Operating humidity
10% to 80% (Without condensation)
