GRASS VALLEY PROFILE XP PVS Series, System Manual

Page: 314 / 352

Chapter A
314
Profile XP System Guide 23 July 2004
Video Monitor
SDTI board
Input Level Supplemental Data: 800 mV p-p
±
10%
Supplemental Data: Input voltages outside this range may cause reduced
receiver performance
Serial Receiver
Equalization Range Requirement: Proper operation with up to 20 dB loss at 750 MHz
using coaxial cable having 1/
√
F
loss characteristics. 800
mV launch amplitude
Output Level Requirement: 800 mV p-p
±
10%
Characteristics
a
a.
The Video Monitor outputs are not broadcast quality. These outputs are for monitoring only.
Description
Number of Outputs Supplemental Data: Four composite outputs
Output Timing Range Supplemental Data: No output timing adjustments
Composite Analog
Format Supplemental Data: NTSC (with or without setup) or PAL
Source Impedance Supplemental Data: 75
Ω
DC Offset Supplemental Data: 0 V
Output Level Supplemental Data: 1 V p-p
Characteristics Description
Standards Conformance Supplemental Data: Serial interfaces comply with SMPTE 259M.
Internal parallel video formatting complies
with SMPTE 125M and related standards for
10-bit component 4:2:2 video. Complies with
SMPTE 305M.
Bit Rate Supplemental Data: 270 Mb/s
Source Impedance Supplemental Data: 75
Ω
Return Loss Supplemental Data: 15dB from 5 MHz to 270 MHz
Output Amplitude Requirement: 800 mVp-p ± 80 mV
Output DC Level Requirement: 0 V ± 0.5 V
Output Rise and Fall Time Requirement: 400 ps to 1500 ps between 20% and 80%
Jitter Requirement:
≤
0.2 UI or 740 ps p-p
Serial Receiver Equalization
Range Requirement: Proper operation with up to 17 dB loss at 135
MHz using coaxial cable having 1/ÖF loss
characteristics with 800 mV launch amplitude
(> 175 meters of Belden 8281 cable).
Characteristics Description