manualshive.com logo in svg

GRASS VALLEY NV9640, User Manual

Share
Download
GRASS VALLEY NV9640 User Manual Download Page 18

8

Introduction

Other NV9640 Functions

Other NV9640 Functions

The NV9640 can be configured to perform the following additional functions:

•

Previous source, free source, “quick” source, and source/destination buttons.

•

Return to a pre-defined (or default) state.

•

Hold breakaway levels.

•

System salvos. 

•

Lock/protect/release for destinations.

•

Forced release of locked or protected devices.

•

Device selection using indexes or suffixes.

The NV9640 provides the following additional features:

•

The NV9640 supports multiple-level breakaways in X-Y mode. This lets you route multiple 
sources to the same destination 

on different levels

.

•

The panel supports gang or dub switching in multi-destination mode. 

•

Broadcast data routing in X-Y mode.

•

Level mapping.

•

Button page “templates”—

 

global navigation templates and suffix templates

 

—

 

for easier 

configuration.

Summary of Contents for NV9640

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands