Important information
viii
Warnings
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture. If the unit
is in a wet or damp environment, a rain cover must be used to protect it for
personal safety reasons (EN60065). The rain cover supplied with the unit protects it
according to safety specification EN60529 up to level IPX2 (spraying water).
To avoid electrical shock, do not remove covers or panels. Refer servicing to
qualified personnel only.
In case of an emergency ensure that the power is disconnected.
Use only fuses of the type and rating specified.
Connect the product only to a power source with the specified voltage rating.
The Base Station must always be connected to protective earth. Do not interrupt
the protection conductor inside or outside the unit. Do not disconnect the
protective earth terminal. Intentional interruption is prohibited and is likely to make
the unit dangerous.
To prevent risk of overheating, ventilate the units correctly.
For safety reasons the Base Station must be mounted in a 19-inch rack which has
safety covers according to IEC65. When two Base Stations are mounted above
each other, the minimum distance between them must be 50mm or the rack must
be force-air cooled.
