Installation | 1.5-inch Viewfinder
2-4
2.4
1.5-inch Viewfinder
2.4.1
Mounting viewfinder and microphone holder
To mount the 1.5-inch viewfinder proceed as follows:
1.
Loosen locking ring (1) of viewfinder support bracket (2) at the front of the
camera handle. (As seen from the rear of the camera, turning the locking ring
counterclockwise moves it towards the handle.)
2.
Slide the viewfinder onto the viewfinder support bracket.
3.
Tighten the locking ring (1) by turning it clockwise (as seen from rear) so that
the viewfinder is mounted securely to the support.
4.
Connect the viewfinder cable to the viewfinder connector socket (6) at the top
right of the camera.
5.
Slide the microphone holder (4) onto the viewfinder and secure with the
knurled screw (5).
Caution
Always fit the microphone holder as it functions as a safety stop for the viewfinder.
6.
To improve the comfort of the skin contact when using the viewfinder, fit the
eye piece cover (3) to the rubber eyepiece. Spare eye piece covers
(3922 405 00461) are available at your Thomson Broadcast and Media
Solutions representative.
Figure 2-3. Viewfinder mounting
5
6
4
3
2
1
Summary of Contents for LDK 300
