manualshive.com logo in svg

GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

The GRASS VALLEY JUPITER CONTROL PANEL L32 - Datasheet and Manual are essential resources for efficiently operating your Jupiter control system. With seamless integration and intuitive features, this panel provides precise control. Download the user manual for free from manualshive.com to unlock the full potential of this exceptional product.

Share
Download
background image

JUPITER L-S and LCD Series Control Panel Instruction Manual

125

LD16 Control Panel

 

2.

Press the 

Multiple Destination? 

soft button. The D1 window will display 

the page number of the display (For example, 

p00

). The D1-D16 

windows’ first line contains the status of 16 Destinations.

•

If Destinations are undefined, the windows will show a series of 
dashes. To define Destinations, see 

Adding or Changing a Destination Soft 

Button Assignment

 on page 125

. You need to define at least one Destina-

tion for one of the D1-D16 windows to use multiple Destination mode. 

Selecting a Destination to Control (Multiple Destination Mode)

1.

Press the soft button next to the Destination to be controlled so it is 
illuminated. Use the 

Up/Down

 arrow buttons to view additional pages of 

Destinations. 

2.

Multiple Destinations on the same page can be selected, if desired.

Selecting a Source (Multiple Destination Mode)

Once Destination(s) to be controlled are selected, the Source is switched in 
basically the same was as in Single Destination mode (see 

Selecting a Source 

(Single Destination Mode)

 on page 121

 for detailed information). 

Direct Category Button Method

1.

Press a Category (For example, “VTR”) and unit number (For example, 
“2”) button combination. 

2.

Press 

Take

. 

Page Selection Method

1.

Press 

Source

. The D1 window will display 

Source?

 in white. Sources will 

appear in groups of 16, in green, in the D1-D16 windows. 

2.

Use the 

Up/Down

 arrow buttons to scroll through the available Sources.

3.

Select the desired Source by pressing its adjacent soft button. 

4.

To execute the switch, press 

Take

. The Source will be switched to the 

active Destination(s). 

Adding or Changing a Destination Soft Button Assignment

A Destination may be added to any unused location in the D1-D16 dis-
plays. One additional page will be available when adding Destination 
assignments. Destinations can also be changed or deleted. 

Summary of Contents for JUPITER CONTROL PANEL L32 -

























































































































































































































Reviews:

No comments

Related manuals for JUPITER CONTROL PANEL L32 -

NCR 1651 Quick Reference Manual preview
1651
Brand: NCR Pages: 6
Ohsung Electronics B905-FTN-TA User Manual preview
B905-FTN-TA
Brand: Ohsung Electronics Pages: 18
Radarcan R-200 User Manual preview
R-200
Brand: Radarcan Pages: 40
Accel 300+ Installation Instructions Manual preview
300+
Brand: Accel Pages: 8
Datavideo WR-500 Quick Start Manual preview
WR-500
Brand: Datavideo Pages: 8
Samson 327 Translation Of The Original Operating Instruction preview
327
Brand: Samson Pages: 73
Yamaha RCX240 Supporting Supplement Manual preview
RCX240
Brand: Yamaha Pages: 92
Casambi RP GROUP Mounting Instructions preview
RP GROUP
Brand: Casambi Pages: 2
Finnleo SaunaLogic SL2 Control Manual preview
SaunaLogic SL2 Control
Brand: Finnleo Pages: 14
Rain Bird EASY RAIN Manual preview
EASY RAIN
Brand: Rain Bird Pages: 11
4EVAC LOOPDRIVE FIM-RC Quick Start Manual preview
LOOPDRIVE FIM-RC
Brand: 4EVAC Pages: 2
Eaton DF6100 Installation And Operation Manual preview
DF6100
Brand: Eaton Pages: 108
Carrier 40BNC Installation Instructions preview
40BNC
Brand: Carrier Pages: 4
elsner elektronik 60121 Installation & Operation Manual preview
60121
Brand: elsner elektronik Pages: 148
YASKAWA MP23xxxiec Series Hardware Manual preview
MP23xxxiec Series
Brand: YASKAWA Pages: 102
O&O CSB-XT Installation And Operation Manual preview
CSB-XT
Brand: O&O Pages: 64
Nexen RSTC1000 User Manual preview
RSTC1000
Brand: Nexen Pages: 28
FAAC 455 D Manual preview
455 D
Brand: FAAC Pages: 15

Brands by name

Popular brands

Load more brands