GRASS VALLEY INDIGO AV MIXER, Quick Start Manual

Page: 30 / 276

28 INDIGO AV Mixer Quick Start Guide
Section 5 — Basic Operation
5.3.5 Making a PiP (Picture in Picture) in SD Mode
This type of transition inserts a picture into the background scene. The
background remains unaffected.
Note The following example uses Key 1 in SD mode, but you can also use Key 2 .
To make a PiP:
1. Select Key 1 [NEXT TRANSITION] .
Key 1 [BUS DELEGATION]
is selected automatically.
2. Make sure Key 1 [BUS DELEGATION] is selected.
3. Make sure
KEYER
main menu is selected.
4. Select the SD KEY 1 submenu and press Type .
5. Select
PiP
as Type .
6. Press the Source button and select the Fill source from the list.
7. Press
Transform
.
8. Make sure the Enable button is activated.
9. Adjust Top Corner , Bottom Corner , and 2D Size as desired to position
and resize the picture.
10. Press the
Cut [KEY 1]
or
Mix [KEY 1]
button.
– or –
Press the
CUT
or
AUTO
button.
–
or
–
Move the
Transition Lever Arm
to the opposite position.
5.3.6 Making a PiP (Picture in Picture) in HR Mode
Making a PiP in HR mode is basically the same as in SD mode.
Note In HR mode, the Fill source must not be the same as the background source.
5.3.7 PiP within a PiP in HR Mode
In HR mode, there is also the possibility to have a PiP within a PiP.
Find the detailed description in the
User Manual .
INDIGO_Update_QSG.book Page 28 Tuesday, August 21, 2007 3:31 PM