Ignite JSC-2300 SHOT Director Robotics/Camera Controller Instruction Manual
49
Section
4
Operation
Note
For a description of SHOT Director™ controls, indicators, and dialog box
functions, refer to
Controls and Indicators
on page 21
.
Note
To make selections and enter information, the following procedures use the
Camera and Preset keypad with the joystick as a pointing device and joystick
top button as a mouse-type left click. Instead of using the joystick, the
MANUAL IRIS
and
FOCUS CONTROL
knobs can also be used during setup to
select various setup parameters.
Operation consists of:
•
Power On/Off
on page 49
•
Camera Selection
on page 50
•
Camera Presets Assignment
on page 50
•
Recall Camera Presets
on page 51
•
Manual Camera Control
on page 51
Power On/Off
Power On
Note
For more information on powering up other devices on the network, see the
operation manual that came with the device.
1.
Ensure that one camera is connected and powered on. Refer to
Connect
to Network
on page 38
.
Note
The first time the JSC-2300 SHOT Director controller powers on, the joystick
calibration dialog box (
Figure 28
) appears. After the initial calibration, every
time the SHOT Director controller powers on, the
CAMERA CONTROL
Home
dialog box (
Figure 13
) appears. If the
Center Joystick calibration
dialog box
appears in the following step, refer to
Calibrate Joystick
on page 39
.
Summary of Contents for Ignite JSC-2300 SHOT
Page 8: ...8 Ignite JSC 2300 SHOT Director Robotics Camera Controller Instruction Manual Contents ...
Page 10: ...10 Ignite JSC 2300 SHOT Director Robotics Camera Controller Instruction Manual Preface ...
Page 62: ...62 Ignite Glossary Glossary ...
Page 66: ...66 Ignite JSC 2300 SHOT Director Robotics Camera Controller Instruction Manual Index ...