GRASS VALLEY Ignite JSC-2300 SHOT, Instruction Manual, Page: 30 / 66

30 Ignite JSC-2300 SHOT Director Robotics/Camera Controller Instruction Manual
Section 2 — Functional Description
Figure 17. Pan/Tilt Softstops Dialog Box
Pan/Tilt IP Address Dialog Box
The
PAN/TILT IP ADDRESS
dialog box ( Figure 18 ) is used to set/change pan
and tilt IP, subnet, and SHOT Director controller addresses. To access it,
press the
Setup
button, select
PAN/TILT SETTINGS
, then select
PAN/TILT IP
ADDRESS
. It enables a user to:
Figure 18. Pan/Tilt IP Address Dialog Box
U:
Set the up tilt soft stop
L:
Set the left pan soft stop
R:
Set the right pan soft stop
D:
Set the down tilt soft stop
Pan:
View current Pan position. L or R is displayed in parens
as the camera is deflected left ot right of center.
Tilt:
View current Tilt position. U or D is displayed in parens
as the camera is deflected left ot right of center.
POINTER;
Change the joystick function to a pointer
JOY:
Change the joystick function to a joystick
SAVE:
Save the current pan/tilt soft stop settings
OK:
Close the
PAN/TILT SOFTSTOPS
dialog box
IP:
Set the Pan/Tilt head IP address
8
4
9
3_
s
c17_r0