7
The Kayenne ClipSTore
www.grassvalley.com
the clipStore itself is entirely configured using the
Kayenne menu. Additionally, to set up the clipStore you
need to cable and configure its inputs used for recording
(sends from the Kayenne switcher) and its outputs used
for playout (returns to the switcher). once this is done,
the clipStore is ready for use.
Configuring the ClipStore Using the Kayenne
Menu
connection to the clipStore is made by configuring its ip
address in the eng Setup / node Settings / Frame Suites
nodes & iD menu and pressing the ‘enable’ button.
Setup and Configuration
