8
Operation
Rear panel
eyepiece. A blue border around the picture and the message “underscan” appear. Set the
switch to Off to return to the original picture.
Menu-Peak control
When the Mode switch (1) is set to Peak, this rotary control adjusts the peaking level
(sharpness) of the viewfinder picture.
☞
Note
☞
Note
It may be necessary to reduce peaking when camera gain is set to high values.
When the Mode switch
(1)
is set to Menu, the rotary is used for navigating the viewfinder
menu. Refer to
, on page 17 for more information about the menu and to
navigate it.
Contrast control
Turn this rotary control clockwise to adjust the contrast of the viewfinder picture according
to your preferences. The range runs from 0 (low contrast) to 99 (high contrast).
Brightness control
Turn this rotary control clockwise to adjust the brightness of the viewfinder picture
according to your preferences. The range runs from 0 (very dark) to 99 (very bright).
Dioptre adjustment ring
The dioptre of the viewfinder can be adjusted to suit your eyesight by turning the dioptre
adjustment ring. Turn to the right for negative dioptre values, turn to the left for positive
values.
Rear tally indicator
This indicator lights to indicate that the camera is On Air. This indicator has the same
function as the front tally indicator.
4
5
6
7
8
