GRASS VALLEY 7500NB Instruction Manual Download Page 61 | Manualshive

Page: 61 / 92

background image

7500 Series Instruction Manual

4-3

Matrix Modules

Bypass module is to allow the expansion frame to be pre-wired and tested
for future expansion. The supported data rates are 143 Mbps, 177 Mbps,
270 Mbps, and 360 Mbps. There are no user adjustments on the module.

SD Output

The module labeled

SD OUTPUT

provides 32 reclocked output channels with

selectable bypass mode for each channel. The supported reclocked data
rates are 143 Mbps, 177 Mbps, 270 Mbps, and 360 Mbps. There are no user
adjustments on the module.

WB 128 DC Distribution

The module labeled

WB 128 DC DISTRIBUTION

provides DC connections for the

48V DC Entry module. It also distributes the 48V power to the frame and
processes the external fan alarm outputs. There are no user adjustments on
the module.

WB Expansion Switch

The module labeled

WB EXPANSION SWITCH

is a reclocking serial digital video

expansion switch that can be configured as a 2x1, 4x1, 8x1, 16x1, or 32x1.
There are no user adjustments on the module.

WB Monitor

The module labeled

WB MONITOR

provides 4 channels of monitoring. It also

provides for one channel of multi-standard CRC error detection. Five
signals are sent from each Output Module to the Monitor Module for
output monitoring. One signal is sent from each Crosspoint Module for
Input monitoring. The

IN

connector for use with an external input signal is

used between 7500WB matrices in expanded systems. There are four

OUT

connectors which can be used for monitoring. When used with a 7000
Series Control System the four connectors provide the same signal to dif-
ferent monitors. When used with an Encore Control System the four con-
nectors can provide up to four different signals to four different monitors.
A fifth video channel is used for CRC checking, but the signal does not
leave the Monitor Module. There are no user adjustments on the module.

WB Output

The module labeled

WB OUTPUT

provides 32 reclocked output channels with

selectable bypass mode for each channel. The supported reclocked data
rates are 143 Mbps, 177 Mbps, 270 Mbps, 360 Mbps, 540 Mbps, 1.485 Gbps,
and 1.485/1.001 Gbps. There are no user adjustments on the module.

WB SD Input

The module labeled

WB SD INPUT

provides 32 equalized input channels. The

supported data rates are from 19 Mbps to 360 Mbps. There are no user
adjustments on the module.

«
...
59
60
61
62
63
...
»

Summary of Contents for 7500NB





























































































Reviews:

No comments

Related manuals for 7500NB

Brand: Makita Pages: 2

Brand: Zoom Pages: 48

RabbitCore RCM4400W

Brand: Rabbit Pages: 126

ControlPoint 2000

Brand: 4Home Pages: 20

Brand: Keithley Pages: 98

kontron KBox E-420-R1K/V1K

Brand: S&T Pages: 82

Brand: ACTi Pages: 12

Brand: IFM Electronic Pages: 14

LMP-1202G-SFP Series

Brand: ANTAIRA Pages: 19

Brand: Alarm Pages: 5

FiberTwist G6426

Brand: Genexis Pages: 9

Disc Publisher XR

Brand: Primera Pages: 2

Brand: Accusys Pages: 34

Brand: Planet Pages: 2

Brand: Smacq Technologies Pages: 22

Brand: Chaparral Pages: 96

Brand: Jensen of Scandinavia Pages: 2

Brand: LanReady Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands