3-4
7500 Series Instruction Manual
Section 3 — Configuration
to set groups of 64 outputs to Asynchronous. If you were configuring a
system that had some Asynchronous Input modules (one or just a few)
and wanted to assign a few Outputs on a Synchronous Output module
to pass asynchronous signals, then use the individual settings under
the
ASync
column.
Outputs can be assigned
Soft Mute/No Soft Mute
and
20/24 Bit
Processing
individually, in groups, or by using the
All
buttons.
Soft Mute/No Soft Mute
The
Soft Mute/No Soft Mute
attribute is a soft mute or alignment of one
signal’s amplitude to another signal’s amplitude at switching. This soft
mute prevents a crack or pop at switching.
20/24 Bit
The
20/24 Bit
attribute determines how the signal bits are processed. A
signal has 24 bits with the last four bits designated as auxiliary (AUX)
bits.
In
20 bit
mode the four AUX bits pass through the router unaffected by
any processing. If left and right channels are swapped, the four AUX
bits stay in the same place. If the signal is muted, the four AUX bits are
not muted.
In
24 bit
mode the router will treat the four AUX bits as though they are
part of the audio data. If left and right channels are swapped, the four
AUX bits will swap locations. If the audio is muted, the four AUX bits
will be muted.
2.
After the Output attributes are assigned click
Ok
to return to the New
Cfgd Node Ctrlr window.
3.
Click the
Input Attrib Info
button to bring up the AES Input Attributes for
Inputs window.
Summary of Contents for 7500NB
