3-5
CHAPTER 3 Settings and Measurement
1 . Status message
Displays the operation status of this device.
: Displayed when data is not being captured.
: Displayed when data is not being captured while XY Screen is used.
: Displayed when the pre-trigger capturing is in progress with the setting to wait for
pre-trigger to complete.
: Displayed while waiting for trigger to initiate after recording has started.
: Displayed when data is captured to the internal RAM.
* : Displayed when data is captured to the internal memory.
* : Displayed when data is captured to the SD card.
* : Displayed when data is captured to the USB memory card.
: Data capturing operation is performed by our application software when connect to
the PC. This status message is displayed when data is not captured to the device.
: Displayed when the device waits for you to press the [START/STOP] key to stop
recording after data capture.
: Displayed when waiting for the repeat interval.
: Displayed when data in the internal RAM is replayed.
* : Displayed when data in the internal memory is replayed.
* : Displayed when data in the SD card is replayed.
* : Displayed when data in the USB memory is replayed.
* : Displayed when replaying during data capture.
* : Displayed when auto save process is in progress.
: Displayed when backup fails (The SD card of the backup destination is removed,
etc.).
: Displayed when demo waveforms are being displayed.
: Displayed while remote lock is released.
* For details of data capture such as trigger and repeat etc., refer to “3.5 Setting Menus” - “(4) TRIG settings”.
* For details of capture settings, refer to “3.5 Setting Menus” - “(2) DATA settings”.
* For details of remote lock release function, refer to User’s Manual GL-Connection.
Please do not turn off the power when the status message states “Capturing to internal memory” or
“Capturing to SD card” (“ * ” status mark) .
Start the operation after making sure that the status mark is switched to "STOP" .
2 . Time/DIV display
With the Y-T Screen, the current time scale is displayed.
Time scale is the current time scale per grid on the horizontal axis.
The display width of the horizontal axis (T-axis) of the waveform is adjustable by changing this value.
