GL900 Descriptions of the Control Panel Keys
2
. SPAN/TRACE/POSITION
3
. TIME/DIV
Press the TIME/DIV key to change the time axis display range on the waveform screen.
1
. CH SELECT
5
Press this key to switch the channel.
Press to switch to the channel with a smaller number, and press to switch to the
channel with a larger number.
This key enables SPAN, POSITION, and TRACE settings to be made independently for
each channel. Each time this key is pressed, the mode displayed in the waveform operation
display area changes in the sequence shown below. Use the and keys to select the
channel, and the and keys to change the setting values.
(14) NAVI
(2) SPAN/TRACE/POSITION
(3) TIME/DIV
(4) MENU
(5) QUIT
(1) CH SELECT
(6) DIRECTION KEYS
(7) ENTER
(8) FAST FORWARD KEY(KEY LOCK)
(9) START/STOP(USB DRIVE)
(10) REVIEW
(12) CURSOR (ALARM CLEAR)
(11) DISPLAY
(13) FILE
MONITOR
1 CH 1
2 + 0.001 V
V
+ 1.234
MONITOR
2 CH 2
1 + 1.234 V
V
+ 0.001
SAMPLE
ZONE 1zone
1ms
Note: If the QUIT key is pressed when the GL900 is in the SPAN,
POSITION, or TRACE mode, the display returns to MONITOR mode.
Displays digital values (default).
Used to make span settings (change the waveform
amplitude).
Used to make position settings (adjust the upper and
lower values of the waveform).
Used to make trace settings (set the waveform display
to On or Off).
MONITOR
SPAN
POSITION
TRACE
GL900-Quick-E.indd 6
08.5.15 3:27:44 PM
