SIMPLIFIED BASIC OPERATION WORKFLOW
C - Designing Templates for the F-MARK2
5
Design Orientation must be Landscape for 11”x17” - 12”x18” - 13”x19”
Design Orientation must be Portrait for 8.5“x11” - 8.5”x14”
Leading Edge
and
Feeding Direction
is always
RIGHT to LEFT
Registration Mark Parameters
A. Two Registration Marks are required along the bottom or Lower Edge of the media.
B. Registration Marks are 4mm Black Squares
C. Distance from the Leading Edge to First Registration Mark is a minimum of
40mm
D. Distance from Trailing Edge to Second Registration Mark is a minimum of
20mm
E. Distance from Lower Edge of media to Registration Marks is a minimum of
6mm
Cutting Parameters
1. Minimum distance from leading edge to cut line depends on the cut:
a.
Kiss Cut
(Half Cutting) minimum
20mm
(30mm is recommended)
b.
Perf Cut
( Dashed Line) minimum
25mm
(35m is recommended)
2. Minimum distance from the Trailing Edge is
5mm
(15mm is recommended)
3. Minimum distance from Top Edge of media to cut line is 5mm (15mm is recommended)
4. Minimum distance from Lower Edge of media to graphics is 15mm (or 5mm from crop marks)
FEEDING DIRECTION
FEEDING DIRECTION
FEEDING DIRECTION
Leading Edge
Lower Edge
Trailing Edge
1st Registration Mark
2nd Registration Mark
