13
After the carbon brushes are replaced, start the hammer with no load and wait until the carbon
brushes fit to the motor commutator.
Entrust replacement of carbon brushes only to a qualified person. Only original parts should be
used.
All faults should be repaired by service workshop authorized by the manufacturer.
TECHNICAL PARAMETERS
RATED PARAMETERS
Demolition Hammer
Parameter
Value
Supply voltage
230 V AC
Current frequency
50 Hz
Rated power
1200 W
Impact rate
3550 spm
Impact energy
15 J
Chuck type
SDS Max
Protection class
II
Weight (w/o accessories)
6.7 kg
Year of production
2014
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure Lp
A
= 89 dB(A) K = 3 dB(A)
Sound power Lw
A
= 105 dB(A) K = 3 dB(A)
Vibration acceleration (front handle) a
h
= 10,325 m/s
2
K = 1,5 m/s
2
Vibration acceleration (rear handle) a
h
= 13,304 m/s
2
K = 1,5 m/s
2
ENVIRONMENT PROTECTION
Do not dispose of electrically powered products with household wastes, they should be utilized in
proper plants. Obtain information on waste utilization from your seller or local authorities. Used up
electric and electronic equipment contains substances active in natural environment. Unrecycled
equipment constitutes a potential risk for environment and human health.
* Right to introduce changes is reserved.
“Grupa Topex Spółka z ograniczoną odpowiedzialnością” Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa
Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes,
drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of
Grupa Topex are strictly forbidden and may cause civil and legal liability.
Summary of Contents for 58G876
