Graphite 58G527, Instruction Manual

Page: 14 / 144

14
Use the power tool in accordance with the manufacturer’s instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. SDS-Plus chuck
2. Fixing sleeve
3. Direction selector switch
4. Switch lock button
5. Switch
6. Operation mode switch
7. Additional handle
8. Depth gauge rod
9. Lock button for depth gauge rod
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY / SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Additional handle - 1 pce
2. Depth gauge rod - 1 pce
3. Drill chuck - 1 pce
4. Drill chuck adapter - 1 pce
5. Drills - 1 pce
6. Carrying case - 1 pce
PREPARATION FOR OPERATION
INSTALLATION OF ADDITIONAL HANDLE
Due to safety issues, always use additional handle when operating the rotary hammer. It can be fixed
in any position on the fixing cylindrical section.
●
Turn lower part of the additional handle (7) counter-clockwise to loosen.
●
Slide the additional handle collar (7) over cylindrical section of the rotary hammer body.
●
Turn to the most comfortable position for the work at hand.
●
Turn lower part of the additional handle (7) clockwise to securely lock in selected position.
INSTALLATION OF DEPTH GAUGE ROD
Depth gauge rod (8) is used to limit the depth of drill penetration in material.
●
Press the lock button for depth gauge rod (9) (fig. A).
●
Slide the depth gauge rod (8) into the hole in the additional handle collar (7).
●
Release the lock button for depth gauge rod (9) to lock in desired position.
Notches on the depth gauge rod (8) should be in level plane, perpendicular to the additional handle (7).
This position allows to optimally secure lock of the depth gauge rod.
INSTALLATION OF WORKING TOOLS
Rotary hammer is designed to operate with working tools with SDS Plus shanks. Prior to operation clean the
chuck of the rotary hammer and working tools. Use grease and apply thin layer onto shank of the working
tool (fig. B).
Disconnect the power tool from power supply.