Graphite 58G072, Instruction Manual

Page: 18 / 156

18
9. Work speed control wheel
10.
Switch for pendulum action setting
11.
Blade protection
12. Edge guide locking screws
13.
Laser switch
14. Laser beam aperture
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY / SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Hexagonal key - 1 pce
2. Dust extraction adaptor - 1 pce
3. Edge guide - 1 pce
4. Transport case - 1 pce
PREPARATION FOR OPERATION
BLADE INSTALLATION
Disconnect the power tool from power supply.
Installation and removal of the blade is toolless.
●
Set the switch for pendulum action (
10
) to position “
III
” and lift the guard (
8
) (
fig. A
).
●
Pull lever of the blade holder ( 7 ) and slide blade into the blade holder ( 7 ) to mechanical stop (blade
teeth should be faced forward) (
fig. B
).
●
Important! Make sure the blade is properly positioned in the guiding roller ( 6 ).
●
Release the lever of the blade holder ( 7 ) and ensure the blade is properly fixed.
●
Blade removal is similar to installation, only the sequence of actions is reversed.
Use blades suitable for T-shank holder mechanism, as shown on fig. C.
DUST EXTRACTION
To improve dust extraction from processed material surface, the jigsaw is equipped with own dust blow-off
and extraction system, which cleans the surface being cut. Dust blow-off and extraction system is more
efficient when the guard is lowered.
●
Slide adaptor ( 3 ) into the dust extraction stub ( 4 ) and turn counter-clockwise to secure ( fig. D ).
●
Attach suction hose of the dust extraction system to the adaptor (
3
). Make sure the connection is
tight.
BLADE STORAGE
Jigsaw features convenient clip for blade storage in the rear part of the footplate ( 5 ).