Granville-Phillips Mini-Convectron 275 Series, Installation, Operation And Service Instructions, Page: 9 / 52

Mini-Convectron
®
Module with DeviceNet
®
Digital Interface 1
Chapter 1 Before You Begin
1.1 Receiving
Inspection On receipt of the equipment, inspect all material for damage. Confirm that
the shipment includes all items ordered. If items are missing or damaged,
submit a claim as stated below for a domestic or international shipment,
whichever is applicable.
If materials are missing or damaged, the carrier that made the delivery must
be notified within 15 days of delivery, or in accordance with Interstate
Commerce regulations for the filing of a claim. Any damaged material
including all containers and packaging should be held for carrier inspection.
Phone customer service at
1–303–652–4400 or 1–800–776–6543 for
assistance if your shipment is not correct for reasons other than shipping
damage.
1.2 International
Shipment Inspect all materials received for shipping damage and confirm that the
shipment includes all items ordered. If items are missing or damaged, the
airfreight forwarder or airline making delivery to the customs broker must be
notified within 15 days of delivery.
If an airfreight forwarder handles the shipment and their agent delivers the
shipment to customs, the claim must be filed with the airfreight forwarder.
If an airfreight forwarder delivers the shipment to a specific airline and the
airline delivers the shipment to customs, the claim must be filed with the
airline.
Any damaged material including all containers and packaging should be
held for carrier inspection. Phone customer service at
1–303–652–4400 or
1–800–776–6543 for assistance if your shipment is not correct for reasons
other than shipping damage.
1.3 Warranty GRANVILLE-PHILLIPS CONDITIONS OF SALE ARE INCORPORATED BY
REFERENCE HEREIN.
1.4 Certification Granville-Phillips certifies that this product met its published specifications
at the time of shipment from the factory. Granville-Phillips further certifies
that its calibration measurements are traceable to the National Institute of
Standards and Technology to the extent allowed by the Institute’s calibration
facility.