background image

- 1 -

hoW to Use yoUr aUtomatiC Gate operator

before  using  your  automatic  Gate

 always look to see if there is any 

person, pet or other obstruction (ie.Parked vehicle) in the path of the gate. 

always wait for the gate to fully open before driving  or walking 

through

.  If the gate begins to close while you are driving through stop the 

vehicle, do not attempt to “beat the gate”, this is extremely dangerous.

if the gate is obstructed while moving

 it will reverse direction to allow 

the obstruction to be freed or if the obstruction prevents the gate from moving  

in the first place it will cut off to prevent burn out.

avoid close proximity

 to areas where fingers or hands could be pinched or 

you can be trapped between two gates, a gate and post or fence.  Stay clear of 

the path of the gate at all times.

never allow children to play with the gate

 or the gate controls, explain 

to children the dangers involved.  Keep remote controls where children or any 

other unauthorized users have no access to them.

if you have a seperate gate for pedestrian entry 

please use this if 

you are on foot rather than the Automatic Vehicle Gate.

in the event you sell the property,

 make sure the new owners have a 

copy of these instructions.  If you lose the instructions they can be downloaded 

from: www.grantsautomation.com.au.

if a photocell is used

 this will prevent the gate from closing on a vehicle  

If  the  gate  is  closing  and  the  photocells  light  beam  is  broken,  then  the  gate 

will reverse open and remain there for as long as the photocells light beam is 

broken.  Once the photocell is cleared the gate will close after the auto-close 

delay or after its own delay if this option is selected.  A photocell doesn’t provide 

this level of safety for any person walking through the gate.

if a ground loop vehicle detector

 has been installed then any vehicle 

approaching the gate from within the property will open the gate automatically 

without the use of a remote control or other control device.  The gate will then 

close automatically once the ground loop and photocells are cleared and close 

delay has timed out.  Any person walking on the ground loop will NOT open the 

gate but a bicycle may do if the ground loop is set up to.

Summary of Contents for e-Gate SWG-12V










Reviews: