51
Instead of setting the flow rate for the system using a flow rate limiter, it is better to adjust
the flow rate using the switch on the pump and by means of the “max. speed” setting on the
controller (see. „6.3.4. - max. speed“ on page 28). This saves electricity!
The service values (see „8. - Service values“ on page 45) include not only current
measurement values and operating states, but also all of the settings for the controller. Write
down the service values at least once after commissioning has been successfully completed.
In the event of uncertainty as to the control response or malfunctions the service values are
a proven and successful method for remote diagnosis. Write down the service values (see „8.
- Service values“ on page 45.) at the time that the suspected malfunction occurs. Send the
service value table with a brief description of the error to the specialist or manufacturer.
In the programs with pool the charging of the pool, e.g. for winter operation, can be switched
off using a simple function. To do this, simply press and hold the “esc” key down for several
seconds on the diagram/overview screen. A message appears on the display as soon as the
pool is switched off or when the pool is switched on again.
To protect against loss of data, record any analyses and data that are particularly important to
you (see 2.) at regular intervals.
Useful notes/tips and tricks
