Grant EFCON5090MOD, User Instructions

Page: 4 / 12

Section 1: Introduction Page 4
1 INTRODUCTION
1.1 ABOUT YOUR BOILER
The boiler is fully automatic once switched on, providing central
heating (and also domestic hot water if you have a hot water
cylinder fi tted).
If your boiler is connected to a programmer, it will provide hot
water and central heating during the time periods set on the
programmer.
1.2 BOILER CONTROLS ACCESS
To gain access to the boiler controls, remove the front casing door
by turning the handle at the bottom anti-clockwise, pulling the
door out at the bottom and withdrawing it from the casing to reveal
the boiler controls as shown in Figure 1-1.
1.3 WHAT THE INSTALLER SHOULD
LEAVE YOU WITH
• A completed boiler passport
• The boiler installation and servicing instructions
• This user handbook
The installer should have advised you how to operate the boiler
and controls, and whether the boiler operates as part of a sealed
system or an open vented system.
If the boiler operates as part of a sealed system, the installer
should have shown you how to check and top up the heating
system should your system pressure drop. Also see Sections 3.1
and 3.2.
1.4 COMMISSIONING
Following installation, your boiler should be commissioned by a
competent person, such as an OFTEC registered engineer, to
validate the guarantee.
During the commissioning process, your boiler will be set to its
optimum e ffi ciency using specialist fl ue gas analysis equipment.
Your installer should arrange for this to be carried out.
A list of OFFTEC registered commissioning engineers can be
found on www.oftec.org .
1.5 ACTIVATING THE GUARANTEE
In order for your boiler’s full* guarantee to be activated, your boiler
must be registered with Grant within 30 days of its installation.
To register your boiler, please ensure the completed boiler
passport is returned to Grant or visit the Grant website:
www.grant.eu
Your installer may have registered the boiler on your behalf and
provided you with the relevant documentation.
*If registered within 30 days, your boiler will have a 5 year
guarantee on the boiler shell and 1 year on the burner and other
components.
Please refer to the boiler installation and servicing instructions for
the full terms of the manufacturer’s guarantee.
1.6 BOILER SERVICING
Your boiler must be serviced every 12 months from the date of
installation to maintain the guarantee, for the entire duration of the
guarantee.
The nozzle and braided oil hose should be replaced annually
If the boiler is part of a sealed system, the air pressure charge
of any expansion vessels fi tted to the system must be checked
annually.
Please make sure that your installer has recorded the service
information in the Service Log at the back of these user
instructions. Should you ever need to utilise the product
guarantee, you will be asked to provide the service history of the
boiler.
o C
Overheat thermostat
reset button
(under screw cover)
Boiler thermostat
‘Lock-out’ reset button
Boiler front
panel removed
Figure 1-1: Euro fl ame Boiler Controls