Section 14: Control Panel
Page 60
14.1 General
The control panel for the Grant VortexAir hybrid is located inside the
boiler casing, immediately above the burner.
To access the control panel fascia, remove the boiler/burner access
panel on the right hand side of the boiler casing.
Turn the handle at the bottom clockwise to release the catch. Pull
the panel forwards at the bottom and remove it from the boiler. Refer
to Figure 14-1.
Figure 14-1:
Removal of boiler access panel
14.2 Hybrid Controls
Refer to Figure 14-3 for the controls located on the control panel
fascia:
14 Control Panel
14.3 Heat and Electricity Meters
Not all installations will require a Heat meter and Electricity meter.
Usually only installations receiving a Renewable Heat Incentive (RHI)
payment will require both the heat meter and electricity meter to be
fitted. Refer to Section 7 for further information.
When fitted, the integrator unit of the heat meter and the electricity
meter will be located in a purpose made housing immediately
above the control panel. The display screens of both meters are
clearly visible in order for meter readings to be periodically taken, as
required, to determine the amount of RHI to be paid. Refer to Figure
14-3.
Figure 14-2:
Resetting the overheat thermostat
Summary of Contents for Aerona3 Series
