Thermo-shaker PCMT
Version 1.01 - January 2013
Page 6
Operating Instructions
Align the block so that the warning label is
facing the front of the unit and secure with the
four knurled screws.
3.7
Note!
When
installing the HC96
block, drive one by one 4 screws for several turns and fix
them with a hex-key (included in the HC-96 thermo-block set).
Fig.1 Thermo-block connection
3.8
Changing Blocks
Disconnect the external power supply unit from the device.
Remove the four knurled screws (fig.2/1); disconnect the plug (fig.1/1).
Select the new block and install it as point 3.5
Fig.2
Thermo-block
set up
