2. Select the contact to call and press
Dial Key
to initiate the call.
Figure 33: Dialing from Contacts List
Direct IP Call
Direct IP Call allows two phones to talk to each other in an ad-hoc fashion without a SIP proxy. VoIP calls
can be made between two phones if:
Both phones have public IP addresses; or
Both phones are on the same LAN/VPN using private or public IP addresses; or
Both phones can be connected through a router using public or private IP addresses (with necessary port forwarding or DMZ).
To make a direct IP call, dial
*47
followed by the IP address of the target. Following the below syntax (Example target IP is 192.168.1.10):
– Dialing *47192*168*1*10 (to use 5060 port by default)
– Users can specify the port number as follows *47192*168*1*10#5062.
Answering Calls
When receiving an incoming call, you can answer the call using following steps:
Earpiece mode:
Press
Dial Key
to pick up the call, or “Accept” softkey (left softkey).
Speakerphone mode:
Press
Speaker Key
to pick up the call.
Headset mode:
Press
Dial Key
to pick up the call, or “Accept” softkey (left softkey) using a connected headset.
Note:
To answer an incoming call during an established call, press
Dial Key
, or the
Speaker Key
, or the “Answer”
softkey. The incoming call is
answered, and the original call is placed on hold.
Note
In order to receive an IP call, user need to disable using a random port, under
Web GUI
🡺
Settings
🡺
General Settings
: Set “
Use Random Port
” to
No
.