Table 11: Handset Menu
Keypad
The WP810/WP822/WP825 keypad can be used by tapping on an input eld. The keypad has 4 modes “Ab3”, “ABC”, “abc” and “123”. Default
mode is “Ab3”.
Figure 10: Keypad Modes
“Ab3” Mode:
This mode allows to enter capital letters, small letters, digits and symbolic characters.
Following table describes allowed characters for each key.
Diagnostics
●
LCD Test
●
LCD off
●
LED Test
●
Keypad Test
●
Audio Loopback
●
Proximity Sensor
●
Vibration
●
Verify Certi cate
Settings
●
Account
: Con gure/View SIP accounts settings and account ringtone.
●
Call settings:
Con gure the account auto answer, call forward, DND and speed dial settings.
●
Network Settings:
Con gure the networks settings including Wi-Fi settings, and additional networks settings.
●
Basic Settings:
Con gure the basic settings including voice settings, display settings, Gestures and button customization, language
settings and date/time settings.
●
Adv. Settings:
Con gure the advanced settings including system upgrade, PTT/Paging settings, system security settings, syslog
settings and factory reset / reboot.
Status
Displays account status, system info, Network status and network statistics
●
Account status
●
System Info:
Press to enter the sub menu for Running memory, Storage status, MAC address, System version, Recovery version, U-
boot version, Kernel version, Hardware version, PN number, Country code and Running time.
●
Network status:
Press to enter the sub menu for MAC address, IP setting information (DHCP/Static IP), IPv4 address, IPv6 address,
Subnet Mask, Gateway, DNS server.
●
Network Statistics:
Press to enter the sub menu for Network SSID, BSSID, IP address, Signal strength, Connection speed, Channel,
Frequency, Tx packets, Tx error packets, Tx error rate, Tx drop packets, Tx drop rate, Rx packets, Rx error packets, Rx error rate, Rx
drop packets, Rx drop rate.