Grandstream Networks UCM6510 User Manual Download Page 452

Page: 452 / 483

P a g e

451

UCM6510 IP PBX User Manual

Version 1.0.20.31

Figure 314: User Management

– New Users

Custom Privilege

Four privilege levels are supported:



Super Administrator

This is the highest privilege. Super Admin can access all pages on UCM6510 Web GUI, change

configuration for all options and execute all the operations.

Super Admin can create, edit and delete one or more users with “Admin” privilege

Super Admin can edit and delete one or more users with “Consumer” privilege

Super Admin can view operation logs generated by all users.

By def

ault, the user account “admin” is configured with “Super Admin” privilege and it is the only

user with “Super Admin” privilege. The Username and Privilege level cannot be changed or deleted.

Super Admin could change its own login password on Web GUI



Maintenance



Change

Information

page.

Super Admin could view operations done by all the users in Web GUI



Maintenance



Operation

Log

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands