HandyTone-486 User Manual
Grandstream Networks, Inc.
30
Firmware File
Postfix
Default is blank. End user should keep it blank.
Config File Prefix
Default is blank. End user should keep it blank.
Config File Postfix
Default is blank. End user should keep it blank.
Automatic Upgrade
Default is “Yes”.
Firmware Key
For firmware encryption. It should be 32 digit in Hexadecimal Representation.
End user should keep it blank.
Authenticate Conf
File
Default is “No”. If set to “Yes”, configuration file would be authenticated
before acceptance. End user should use default setting.
Lock keypad
update
If this parameter is set to “Yes”, except for IVR MENU items 1 to 5, the
configuration update via keypad is disabled.
Allow conf SIP
Account
in Basic Settings
Default “No”. If set to “Yes”, user ID, authentication IP, authentication
password and display name can be configured in BASIC SETTINGS page.
6.2.4
Saving the Configuration Changes
Once a change is made, users should click on the “Update” button in the Configuration page. The
HandyTone-486 will then display the following screen to confirm that the changes have been saved.
Grandstream Device Configuration
STATUS
BASIC SETTINGS ADVANCED SETTINGS
Your configuration changes have been saved.
They will take effect on next reboot.
All Rights Reserved Grandstream Networks, Inc. 2005
6.2.5
Rebooting the HandyTone-486 from remote
The user/administrator of the HandyTone-486 can remotely reboot the HandyTone-486 by pressing the
“Reboot” button at the bottom of the configuration page. Once done, the following screen will be
displayed to indicate that rebooting is underway.