HandyTone-486 User Manual
Grandstream Networks, Inc.
18
WAN port
0
LAN IP
LAN port
0
Protocol
UDP Only
WAN port
0
LAN IP
LAN port
0
Protocol
UDP Only
WAN port
0
LAN IP
LAN port
0
Protocol
UDP Only
Update
Cancel
Reboot
All Rights Reserved Grandstream Networks, Inc. 2005
End User
Password
This field contains the password to access the Web Configuration Menu. The
password is case sensitive with a maximum of 25 characters.
IP Address
There are 2 modes under which the HandyTone ATA can operate:
- If DHCP mode is enabled, then all the field values for the Static IP mode are
not used (even though they are still saved in the Flash memory) and the IP
phone will acquire its IP address from the first DHCP server it discovers on
the LAN it attaches to.
To use PPPoE feature please set the PPPoE account settings if the HandyTone
ATA is connected directly to a DSL modem. The HandyTone ATA will
attempt to establish a PPPoE session if any of the PPPoE fields are set.
- If Static IP mode is selected, then the IP address, Subnet Mask, Default
Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fields
will need to be configured. These fields are set to zero by default.
Time Zone
This parameters decides how the displayed date/time will be adjusted
according to the specified time zone.
Daylight Savings
Time
This parameter decides whether the displayed time will be daylight savings
time or not. If set to “Yes”, then the displayed time will be 1 hour ahead of
normal time. Default is No.
Device Mode
Default is NAT router mode. HandyTone-486 Rev.2.0 can be configured in
Bridge mode so the device functions as a bridge.
Cloned WAN MAC
Address:
Allow user to set a specific MAC address. Set in Hex format.
LAN Subnet Mask
Sets the LAN subnet mask. Default value is 255.255.255.0. If bridge mode is
selected, the LAN settings have no effect.
LAN DHCP Base IP:
Base IP for the LAN port, which functions as a gateway for its LAN. Default
value is 192.168.2.1
DHCP IP Lease
Time
The amount of time that a given IP address will be valid for a LAN client.
Value is set in units of hours. Default value is 120hr (5 Days).
