manualshive.com logo in svg

Grandstream Networks HandyTone-486, User Manual

Share
Download
Grandstream Networks HandyTone-486 User Manual Download Page 20

HandyTone-486 User Manual 

Grandstream Networks, Inc. 

 

20 

MAC Address 

The device ID, in HEX format.  This is very important ID for ISP 
troubleshooting. 

WAN IP Address 

This field shows WAN port IP address. 

Product Model 

This field contains the product model info,  such as HT486 Rev:2.0 

Software Version 

Program:

 This is the main software release. This number is always used for 

firmware upgrade.  Current release is 1.0.8.12. 

Bootloader: 

current version is 1.0.8.9. 

HTML:  

 current version 1.0.8.12. 

VOC:

   current version is 1.0.0.10 

 System Uptime 

This shows system up time since last reboot. 

Registered 

Whether the unit is registered to service provider’s server. 

PPPoE Link Up 

This shows whether the PPPoE is up if connected to DSL modem. 

NAT  

This shows what kind NAT the HandyTone ATA is connected to via its 
WAN port.  It is based on STUN protocol. 

NAT Mapped IP 

WAN side public IP if connected to LAN of a SOHO router. 

NAT Mapped Port 

WAN side SIP port if connected to LAN of a SOHO router. 

Other Statistical 
Status of ATA 

Self explainable, please see the page displayed. 

 
 

6.2.3

 

Advanced User Configuration 

 
To login to the Advanced User Configuration page, please follow the instructions in section 6.2.1 to 
get to the following login page. The password is case sensitive and the factory default password for 
Advanced User is “admin”. 
  
Advanced User configuration includes not only the end user configuration, but also advanced 
configuration such as SIP configuration, Codec selection, NAT Traversal Setting and other 
miscellaneous configuration.   Following is a snap shot of the advanced configuration page. 
 
 

Grandstream Device Configuration

 

Summary of Contents for HandyTone-486









































Reviews:

No comments

Brands by name

Popular brands

Load more brands