Grandstream Networks GXP2120, Setup Manual

Page: 9 / 11

PaloSanto Solutions
Grandstream GXP2120 Server Setup Guide
9
AUTOPROVISIONING USING ELASTIX’S ENDPOINT
CONFIGURATOR
1. In the Grandstream GXP2120 WebUI, go to “ Settings => Advanced Setings ”
section. In the Firmware Upgrade and Provisioning section set the following (Figure
4.10):

Upgrade Via: TFTP

Config Server Path: Elastix’s IP Address (
192.168.1.65 in this example)
Figure 4.10 Advanced Settings
2. Click on “ Update ” button located at the end of the page. Now, in the Elastix WebUI
go to “PBX => Endpoint Configurator” (Figure 4 -11).
Figure 4.11 Endpoint Configurator
3. Next to the “Discover Endpoints in this Network” button, type the address where
the phone is located and hit Enter (or click the button). This will generate a list with
all the phones available in that network (Figure 4-12).