Grandstream Networks GXP 140X, User Manual

Page: 34 / 80

FIRMWARE VERSION 1.0.5.58 GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL Page 34 of 80

While 1 call is active, the other call will be put on hold with its LINE key blinking in green;

Press CONF key;

Press the desired LINE key on hold, the conference will be established;

Repeat the previous 2 steps for all the other parties on hold to join the conference.

Cancel Conference .

If after pressing the CONF key, the user decides not to conference, press Cancel softkey or the
current active LINE key (LED in solid green);

This will resume the 2-way conversation with the current line.

Split and Re-conference .

During the conference, press HOLD key. The conference call will be split and the calls will be put
on hold separately with the LINE keys blinking in green;

Select 1 LINE key and press to resume the 2-way conversation;

If users would like to re-establish conference call, before 1 separate LINE is selected, press the
ReConf softkey right after the conference call is held/split;

End Conference .

Press HOLD key to split the conference call. The conference call will be ended with both calls on
hold; Or

Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
GXP2120/GXP2110/GXP2100/GXP14xx supports Easy Conference Mode , which can be used combined
with the traditional way to establish the conference.

Initiate a conference call .

Establish 1 call;

Press CONF key and a new line will be brought up using the same account;

Dial the number and press SEND key to establish the second call;

Press CONF key or press the ConfCall softkey to establish the conference.

Join more parties in established conference call .

Establish conference call;

Press CONF key and a new line will be brought up using the same account;

Dial the number and press SEND key to establish the second call;