GRANDSTREAM GXV31XX/GXP11XX/GXP14XX/GXP21XX SERIES PHONES
20-BD5320-00
©
2011 GRANDSTREAM
PAGE 27 OF 46
The
Standard Options
and
Advanced Options
should already be configured as specified in
section
3.1 BroadWorks Device Profile Configuration
.
This section identifies the required
settings for
Auto Configuration Options
and
Device Management
.
5.2.2.2.1.1
Configure Auto Configuration Options
Modify the device profile type
Auto Configuration Options
as shown in the following table.
Note that these are common settings that apply to all devices enabled for Device
Management.
Parameter
Value
Description / Notes
Auto Configuration Type
2 Config File
This setting activates the Device
Management configuration items.
The
2 Config File
button has no
relevance to Device Management,
it only activates the setting field.
CPE System File Name
not_used
This field is not used by Device
Management and should be set to
“not_used”.
Device File Format
not_used
This field is not used by Device
Management and should be set to
“not_used”.
Example
Auto Configuration Options
settings are as follows:
Figure 4 Auto Configuration Options Settings
5.2.2.2.1.2
Configure Device Management Options
Modify the device profile type
Device Management Options
as shown in the following
table. Note that these are common settings that apply to all devices enabled for Device
Management.
Parameters that have not been identified in the following table can be left set to the
defaults.
Parameter
Value
Description/Notes
Device Configuration
Tags
Use Default System Tag Set and
Tag Set
Select the device tag set created in
section
5.2.1.2 Create Device Type
Specific Tags
.
Allow Identity/Device
Profiles to Configure
Custom Tags
Checked
Optional
