Grandstream Networks BroadWorks BroadSoft GXV3100 series, Configuration Manual

Page: 17 / 46

GRANDSTREAM GXV31XX/GXP11XX/GXP14XX/GXP21XX SERIES PHONES 20-BD5320-00
©
2011 GRANDSTREAM PAGE 17 OF 46
4.2 Subscriber Level Configuration Parameters
This section identifies the device-specific parameters, including registration and
authentication. These settings must be unique across devices to be matched with the
settings for a BroadWorks subscriber.
Provisioning a subscriber to register with BroadWorks allows calls to terminate to the
subscriber’s line. Registration requires that a unique address of record (AoR) is
provisioned on BroadWorks and the phone; provisioning an AoR on BroadWorks consists
of setting the line/port parameter to a unique value within the Application Server cluster.
Grandstream GXP11XX/GXP14XX/GXP21XX/GXV31XX each supports different
numbers of SIP accounts. The following example shows how to configure subscriber
elements for an account.
Step Command Purpose
Subscriber Configuration Items
Step 1 Enable each line to be used.
Account Active = "Yes" ;
Enable a line of GXP21xx/GXP14xx/
GXV31XX in use.
Step 2 Set display name for each
line.
Example:
Account Name = "BroadSoft" ;
For each line, configure the SIP Account
Name to be displayed on the phone.
Step 3 Set Register User ID for
each line.
Example:
SIP User_ID = "2405551111" ;
The Register User ID must correspond with
the line/port setting on BroadWorks.
Step 4 Enable SIP Authentication
for each line.
Example:
Authenticate ID =
"1111@as.mycompany.com" ;
Authenticate Password =
"welcome" ;
If the Authentication service is configured
on BroadWorks, these parameters must be
configured to match the BroadWorks
settings.
Step 5 Configure caller ID name for
each line.
Example:
Name = “Claire Smith” ;
Configure the caller ID name for each line.
Subscriber BLF Configuration Items (GXP21xx only)
Step 1 Configure eventlist BLF for a
line.
Example:
eventlist BLF URI =
“BLF2405551111”;
Configure the event list Busy Lamp Field
(BLF) from the
Account Settings page.
Step 2 Configure BLF Call-pickup
Prefix.
Example:
BLF Call-pickup Prefix =
Configure the BLF Call-pickup Prefix from
the
Account Settings page.