Grandstream Networks, Inc.
GXW40XX User Manual
Page 29 of 40
Firmware 1.0.5.10
Last Updated: 01/2012
Hunting Group
This feature enab les the gat eway to regist er all e xisting FXS ports with the same
phone number. Each incomi ng call will be routed to first availa ble port in Line ar or
Circular mode. User may configure all ports as members of the same Hun ting Group
or it may configure different port combinations for more than one Hunting Group.
For example: Ports 1, 3 and 5 are members of the same Hunti ng Group, the rest o f
the ports may have separate numbers and may be reached independently.
Any port, member of a Hunting Group that is not registered with a SIP account, will be
able to place outbound calls using the SIP credentials of the primary Hunting Group
port.
For example: Port 1, 3 an d 5 are m embers of the same Hunting Group. Port 1 is
registered with a SIP account. Ports 3 and 5 are not registered. Ports 3 and 5 will be
able to place outbound calls using the SIP account of port 1.
Select appropriate value for Hunting Group feature. The original SIP account sho uld
be set to Active while the gr oup members should be set to the port nu mber of th e
Active Port.
Example configuration of a multiple Hunting group:
FXS Port #1: SIP UserID and Authenticate ID entered, Hunting group set to "
Active
"
FXS Port #2: SIP UserID and Authenticate ID left blank, Hunting Group set to "
1
"
FXS Port #3: SIP UserID and Authenticate ID left blank, Hunting Group set to "
1
"
FXS Port #4: SIP UserID and Authenticate ID entered, Hunting group set to "
Active
"
FXS Port #5: SIP UserID and Authenticate ID left blank, Hunting Group set to "
4
"
FXS Port #6: SIP UserID and Authenticate ID left blank, Hunting Group set to "
4
"
FXS Port #7: SIP UserID and Authenticate ID entered, Hunting group set to "
Active
"
FXS Port #8: SIP UserID and Authenticate ID left blank, Hunting Group set to "
7
"
Hunting Group 1 cont ains ports 1, 2, 3. Hunting Group 4 contains ports 4, 5, 6.
Hunting Group 7 contains ports 7, 8.
Port#
FXS Port Number
Offhook Auto-dial
This feature allows you to automatically dial the number specified in this field as soon
as the port is offhooked, i.e. when the receiver on the p hone connected to
Port#
is
picked up.
Map to FXO Port#
This is used only when peering with a Grandstream GXW410x. Default is 1,
Supported values are 1-8, meaning line 1 to line 8 of the GXW410x device where the
port will be mapped to.
Map to FXO Gateway IP
This is used when peering with an FXO gateway of any brand. You have to
specifically mention the IP and sip port where the call will be sent to.
and Port
Sip port that will be annexed to the IP address above.
