21
STEP F
OUR
2
1
MIDDLE ASSEMBLY INSTRUCTIONS
GRANDIO
T I P
You will need a minimum of
(2) people to complete the
middle assembly of your greenhouse. The
more people the merrier at this stage of
assembly.
Warning:
The person(s) holding the front or back sections vertical must continue to do so until the L08C-X angle supports
are attached securely to the front and base as shown in step 4.5. Failure to hold front vertical will cause the front to fall and
damage the base kit, front framing etc. Damage caused by improper installation is not warrantable.
ML01/
NUT
S04 BOLT
W05
CLIP
BA-S2
601A
ML01
S04
Inside View
Front Right side
BA-S1F
BA-S2
BA-S1
4.1
We recommend pre threading all (9) W05
Clips with the nut and bolt combos now. See ,
note the bolt head will always slide into the extru-
sion, W05 clips will be used in step 4.5.
4.2
With no less than 2 people place the pre
assembled front section on top of the base kit front.
Have person (1) hold the front vertically while the
other attaches the front section 601A’s to the base
using S04/ML01 fasteners as shown in .
Person (1) must continue to hold up the front wall!
BA-S1
Summary of Contents for Ascent 8x8 KIT
Page 46: ...NOTES NOTES 45...
