15
Install Ignitor Battery
15
Unscrew Ignitor Cap from Control Panel.
Place supplied AA battery into the Ignitor
Slot with positive pole facing you.
Position the Cap and Spring over the AA
battery and tighten onto Control Panel.
WARNING
!
Failure to read and follow the Use and Care
Instructions could result in a fire or explosion
that could cause serious bodily injury, death or
property damage.
!
Final Grill Assembly Step
When you have finished assembling your
grill be sure that all screws are tightened
for safe operation of your grill.
Install Cooking Components
17
With the assistance of another person,
perform this Electrode Check before
proceeding.
16
Be sure all Control Knobs are set to
"OFF" and open the Grill Lid.
Have your assistant stand behind to the
right of the grill and look toward the front
of the grill bowl.
Never
put your face
inside the Grill Head.
Press the Ignitor Cap. You should hear
a "clicking" sound. Your assistant should
see a blue spark within each Gas
Collector Box. If a spark is present the
Electrode Tips are properly positioned.
If no spark is seen, the Spark Gap
needs to be adjusted as follows:
This test will ensure that the Spark Electrode Tips
are properly positioned so your grill lights easily
and properly.
•
•
•
Using an adjustable wrench, loosen the
Inside Nut until the Gas Collector Box can
be turned upward.
If the gap between the Spark Elec-
trode Tip and Receiver is more than
3/16" use long nose pliers to gently
squeeze the Gas Collector Box to
narrow gap.
Return the Gas Collector Box to its
original position, secure the Inside Nut
and try the Electrode Check again. If no
"clicking" sound is heard:
AA Battery may be installed backwards.
Electric wires may be loose. Remove
the AA Battery and inspect the Ignitor
Junction Box found behind the Control
Panel and reconnect any loose wires.
•
•
IGNITOR SLOT
AA BATTERY
IGNITOR CAP
+
_
SPRING
Spark Gap
Gas Collector Box
Spark Electrode Tip
Spark Receiver
Inside Nut
Savor Plates
™
Cooking Grids
Secondary Cooking Rack
Place the Savor Plates
™
above the
Burners.
Place the Cooking Grids on the ledge
above the Savor Plates
™
.
Place the Secondary Cooking Rack on
the slots on either side of the Grill
Bowl.