■
Connections and Operations
1)
Connect the HDMI input source (
such as HD-DVD/ PS3 /STB etc.)Into MX0808-311.
2)
Connect the standard HDMI outputs (
such as HD-LCD, HD-DLP) into MX0808-311.
3) Connect two CAT-5E cables to both the STP/UTP outputs of MX0808 - 311 and inputs of
STP/UTP receiver (
such as EX0101-U31/33/51/53 etc). Please pay attention to the
sequence of the two cables, CAT5e-1-> CAT5e1, CAT5e-2- > CAT5e2. (
The cable
termination must follow the standard of EIA/TIA 568B, if Single UTP mode, just connect
CAT5E -2).
4)
Connect the HDMI output (
such as : HD-LCD
、
HD-DLP ) into the STP /UTP receiver.
5) Connect the IR RX receiving cable into STP/UTP receiver IR RX and connect the IR TX
cable into MX0808-311 IR emitter.
6) Power on the input source you want to show. (
Keep the unused input power off,
otherwise it may interfere the normal display).
7)
Connect the power supply into MX0808-311.
8) Turn on the power, when the LED panel stops flashing circularly, the initialization of the
matrix are ready.
9)
Turn on the displays you want to watch.
10) Use the remote supplied or pushes the button on the front panel to choose input source, or
using infrared extension receiver, RS232, RS485 or LAN port to do the control.
Summary of Contents for MX0808-311
Page 4: ......
