Grandbeing MX0808-311, Operating Instructions Manual

Page: 17 / 27

6) Read Status Command
The command length is 4 bytes.
bc + ‘_’ + ‘ ’
↙
“bc” is the key word, ‘_’ is Space, ‘ ’ is carriage return.
↙
When you send the read status command to MX0808, if succeeds, it will feedback the status of
all outputs. When you send “Bc” to MX0808, if succeed, it will feedback the current status of
MX0808.
For example, if you send "bc
↙
"to MX0808,if succeeds, it will feedback
"s11\r\n" ,"s22\r\n" ,"s33\r\n" ,"s44\r\n" ,"s55\r\n" ,"s66\r\n" ,"s77\r\n" ,"s88\r\n" .it means that
the output 1 select the input 1, the output 2 selects the input 2, output 3 selects the input3,
output 4 selects the input 4, output 5 selects input 5, the output 6 selects the input 6, the output
7 selects the input 7, the output 8 selects the input 8.
7) Web password reset
The command length is 4 bytes.
rpw+ ‘
↙
’
“rpw” is the key word , ‘
↙
’ is carriage return.
When you send the Web password reset command to MX0808, if succeed, it will feedback "rpw",
and the web password will be set as "0000000000".
4. LAN Control.
Note:
Use the direct UTP cable to connect with PC, or use cross cable to connect to the Ethernet
switcher
A.When NETCTL run on PC at the first time, it will create a file ‘NETCTL.TXT’. This file is
for device information’s backup. These information include MAC address of MX0808, IP
address, device name etc.
Double click NETCTL.exe to run NETCTL. It will search the device. If the device is a new one,
NETCTL will list it‘s IP address. If IP address appears, please click the button
.
NETCTL will change the IP address to device name.