21
11. FAQ
Q: How come I don’t see any nodes on my tree view when I start up the program?
Ans.:
Your PC or the USB Server might not be connected to the network correctly, using a personal
firewall on your PC might interfere with the performance of the USB Server Application. If your PC or the
USB Server(s) is connected to the network correctly, press on “Search” to fix the problem.
Another possibility is that the driver was not correctly loaded when the program starts up. In this
case, please shut-down the program and restart it again.
Q. How come I don’t see any servers on my USB Server GUI after installing it?
Ans.:
One of the possibilities that might have caused this is that there is a Firewall software installed on
your PC. The Firewall will block any unauthorized attempt to access the network from your PC, and since
you have just installed USB Server on your PC, its attempt to search the network for any servers or
devices will be dimmed as unauthorized until you state otherwise to the Firewall. To solve this problem,
when your Firewall software warn you that USBServer is attempting to connect to the network and would
you allow it or block it, please allow it, and then click on “Search”.
