SERVICE AND MAINTENANCE
84
CLEANING OF TUBE
An important factor for the long life of tube fabric is regular adequate cleaning.
The subsequent cleaning procedure is recommended:
Rinse off with clear, tap water (approx. 20 °C).
Use gentle soapy water (pH value neutral to slightly alkaline) to wash the tube by means of a
soft cloth or brush. Do not leave the soapy water on the surface for more than 5 minutes.
Clean the surface very thoroughly and make sure that no soap residue remains on the surface.
Then dry by wiping off the surface with a soft cloth.
DO NOT USE:
Any cleaning device that might cause mechanical damage to the surface such as hard
brushes, high-pressure washers, etc.
Any cleaning agents (scouring agents or scrubbing powder), which will damage the surface.
Strong alkaline cleaning agents, Acid cleaning agents.
Solvent based cleaning agents (e. g. based on ester, ketone, ether, furan or benzol).
Petrol, diesel, kerosene.
Self-made cleaning agents.
Bleaching or oxidizing cleaning agents (e.g. containing hydrogen peroxide, sodium
hypochlorite, chlorine dioxide or sodium dithionite).
Summary of Contents for GOLDEN LINE G340N
