GRAND Golden Line G500LF,G500GLF
UM15000
10
MAINTENANCE
Main conditions of long service life is right and careful service.
Avoid excessive increasing of pressure in the board,
especially f rom heating by the sun rays.
After exploitation take off sand and dirt from boat surface,
and caref ully dry it.
Avoid the water getting into the chambers. If a fuel or an oil / gas
gets to the boat surface it is necessary to wash the soiling
place by soap water as soon as possible and dry.
Pay attention to the condition of bottom and seat surfaces. If
the coating is destroyed it is necessary to dry this element
and restore the defend ply.
After the season prepare the boat to winter keeping.
Clean boat surface from sand and dirt and make the
necessary repairs, if damages take place. If it is possi
ble, keep the boat in the open and slightly pumped state
in air temperature 0-25°C. The boat must be protected
from the sun rays.
Insignificant boat repairing (eliminating the board punctures
or cuts) you may carry out by yourself. In this case use
the coated fabric patches from the complete set. Ask
your dealer for the correct type of glue you may use for
the repair.
W e use only top quality stainless steels, which are resi
stan to corrosion. However, it is not permanent and
maintenance is required:
-Avoid contamination and scoring its surface,
-Frequently wash with fresh water,
-Grease and mirror polish it regularly.
In case if sufficient damagesof hull, tube body, partitions
or seams it is recommended to apply for professional
rep air
in authorised service station.
OPRAN
OPERATING REGULATIONS
OA
Dear user,
W e thank your for your purchase and do hope that you will
have a great fun of it. However, to make your joy and
pleasure complete, we would request you to read carefully
and observe the directions and recommendations specified
b e l o w.
IT IS STRICTLY FORBIDDEN :
to handle the boat in the state of intoxication and without individual
rescue means being used (life-saving belts, jackets, etc.)
IT IS FORBIDDEN :
- to overload the boat above the design weight-carrying capacity;
- to use an outboard engine of power exceeding the maximum
allowable value;
- to bring the tube pressure up to the value exceeding the rated
one ( 0.15 bar/ 2.15 psi );
- to drag the boat across a rough surface.
Danger of usage of engine having insufficient or
e x c es s i v e po we r
According to the safety regulations, each inf latable boat
should be furnished with an outboard engine having the
maximum allowable power. You will f ind the data on the
maximum allowable power of the engine on the manufacturer's
plate with the designation of the model type inscribed thereon.
The plate is fixed in the afterbody of the boat. However, your
should choose the engine power within the allowable range
so as to ensure that you may safely reach the shore when
heading into the wind or into the current.
Observation of local shipping regulations
For each particular water area the local shipping regulations
are in force. You may apply for information to the appropriate
water transport and shipping directorate, as well as to the
water police.